This package is great. I was just going to get the softener until big package went on sale. I save money by buying to complete setup at once. Buying it this way is like getting the undercabinet reverse osmosis with tank and faucet for free for additional savings. 1st thing to note is that your filters will arrive in several shipments. Mine arrived in 5 separate shipments. I only received 1 tracking number. So when I tracked my order, it said it would arrive March 21. To my surprise, I got a partial shipment following the day I ordered it. Marked on the packages is a red label explaining that there will be other deliveries and just 1 tracking number. The last package arrived March 20..yes on a Sunday. All packages arrived in good condition and earlier than quoted.
As for the install, it was also easy and straight forward. My house was ready for a water softener install along with a drain. Plumbing took about 2.5 hours total. Since the water softener unit I purchased is made with 1" lines, I used 1" pex and sharkbite push connectors to plumb it all together. I used 2 adapters to connect it to my home copper lines that are 3/4" lines. Plumbing parts cost me $468 tax included. Yes, 1" sharkbite connectors are expensive but easy to work with. Cheaper Plumbing can be had by either using Pex clamps or a 3/4" lines and reducing the Plumbing at each filter inlet and outlet. I choose to keep ot all uniformed. I saved a little money by turning the water softening unit "sideways". It eliminated 2 90 degree elbows which was about $40 in savings. I used about 15 feet of 1" PEX line. (About $15 worth). The cost is all in the connectors. Again, you can plumb it cheaper, but I wanted the ease of it. No leaks, all fittings installed great. I used Teflon tape and a very small dab of silicone for the threads. I used aquarium safe silicone. A small dab is about half a pea size. I wrapped the connectors with Teflon tape and evenly spread the silicone over the tape. This causes a small bead of silicone when the connectors are screwed in all the way, thus sealing it. No leaks. I let it dry overnight. In the morning, I completed the Plumbing to the house and followed the instructions in the manual. It took about 10 minutes for the water to run clear when flushing the carbon out of the lines. If you have a 2 story home, make sure you bleed out the air in all faucets, showers and toilets...especially on the second floor. If you don't, you can lose water pressure due to the trapped air. It happened to me. I simply opened up all faucets upstairs and opened the bypass for the water softener to get water flowing again. After all air was released from the lines, the unit had been working perfectly. We noticed the difference right away after initial setup of the water softener. It takes about an hour for this. You will notice it right away on the cold water side. To notice the hot water difference, it took us a day because of the old water inside of the water heater. We needed to use that water 1st before the softened water came through. I finished install on March 22 and we have been enjoying our system. Water feels and tastes great. No problems so far. Make sure you use the online calculator to program your unit. Ours will regenerate every 3600 gallons at 2am. Our hardness is at 267 in Las Vegas. Make sure that is programmed correctly. You don't want to waste water by regenerating unnecessarily. You will just waste water and salt. If any updates are needed, I will post it.
Add to your order
-
Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary) -
24/7 support when you need it. -
Quick, easy, and frustration-free claims.
Cover this product:
3-Year Protection $129.99
4-Year Protection $169.99
Cover all of your eligible devices:
Asurion Complete Protect: One plan covers all eligible past and future purchases (Renews Monthly Until Cancelled) $16.99/month
Select a plan
Add to your order
- Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary)
- 24/7 support when you need it.
- Quick, easy, and frustration-free claims.
Cover this product:
Select a plan
What other items do customers buy after viewing this item?
Page 1 of 1 Start overPage 1 of 1
From the brand
About Aquasure:
We manufacture water softeners, whole house and reverse osmosis systems & more to provide clean, healthy water for you and your family.
-
Aquasure was formed by industry professionals with over 25 years of experience. Our vision is to provide affordable, uncompromised quality water treatment solutions to everyone. We're set on improving the water quality for our customer's health and home.
-
-
-
-
Product Description
Aquasure Signature Series Water Filtration System
Providing Clean, Spa-Quality, Healthy Water for your family and friends.
Aquasure Whole House Water Filtration System helps provide the clean, spa-quality, healthy water for your entire home. It combines our robust AS-F120PS pleated sediment filter and AS-FP600 water conditioner to help remove larger particles and chemicals that may be harmful to your health. The AS-HS32D 32,000 grains whole house water softener softens your water to provide scale and spot free water for the entire house. The AS-PR75A under the counter reverse osmosis water filtration system removes up to 99% of water contaminants including virus, lead, bacteria, cysts, fluoride, arsenic and much more to ensure clean, healthy crisp tasting drinking water is available for your family.
- Healthy, chemical free and bacteria free water for the whole house.
- Soft, scale-free water for every faucet outlet.
- Spa-quality liked water during every shower.
- Bottled Water quality drinking water for the whole family.
This Package includes
- AS-F120PS / 100,000 Gallons Whole House Pleated Sediment Filter
- AS-FP600 / 600,000 Gallons Whole House Water Conditioner.
- AS-HS32D / 32,000 Grains Whole House Water Softener
- AS-PR75A / 75 GPD Reverse Osmosis Water Filtration System
System Overview:
|
|
|
|
|
|---|---|---|---|
Stage 1 - 20" Pleated Sediment Whole House water FilterProvide clean, sediment-free water at up to 100,000 gallons before change out. The unique pleated sediment filter maximized the dirt-holding capacity to help reduce sand, dirt & large particles such as rust. It is a great pre-treatment filter for the whole house.
|
Stage 2 - GAC / KDF Mix Media Whole House Water Treatment SystemProvide spa-quality water that removes contaminants such as chlorine, heavy metals, skin damaging chemicals, and inhibits bacteria growth. The Fortitude AS-FP1000 offers 600,000 gallon capacity for a household with 1-2 bathrooms. It also features a 1” inlet/outlet to ensure almost no reduction in water flow.
|
Stage 3 - 32,000 Grains Whole House Water SoftenerProvide Soft, scale and spot free water for the entire house. Design to treat up to 32,000 Grain of hardness with exceptional performance in removing hard minerals such as calcium and magnesium. Perfect for the household size of 1-2 bathrooms and up to 3 people.
|
Stage 4 - 75 GPD Under Sink Reverse Osmosis Water Filtration SystemProvide clean, healthy, crisp tasting drinking water at 75 GPD production rate. It offers exceptional performance in contaminant rejection of up to 99% of water contaminants including fluoride, arsenic, lead, bacteria, virus and much more.
|
Clean Healthy Water
Invigorating Bathing Experience
Save Money & Environment
Easy Install and Maintain
Soft, Scale-Free Water
Healthy, Vibrant Skin
Work Efficiently
Built for Performance
Pure Tasting Water
Impeccable Performance
Precision Engineered
Sense of Security
We're passionate about water filtration and getting you the results you expect
|
|
|
|
|---|---|---|
Easy DIY InstructionsOur readily available installation instructions fully cover each step of installing your water filtration system. Written by professionals, so you can rest assured that they're detailed and well thought out. You won't find yourself wondering what to do or where to go next. |
Dedicated US Based Support TeamOur professionals are standing by to answer any questions you might have about the installation process, and their expertise is unmatched in the industry. Take advantage pre- or post-purchase and contact our support team. |
Professional Products. Professional Results.Our water filtration systems are made to provide you with the results you want. And with proper installation will do so for years to come. Try us out. Experience what makes Aquasure an industry leader in water filtration. |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:46
Click to play video
My Honest Review of Aquasure Whole House Water Filter
Lauren Capriola
Videos for this product
1:21
Click to play video
Aquasure Harmony Series Water Softener
Aquasure USA
Videos for this product
1:50
Click to play video
Aquasure Premier Series RO Water Filtration System
Aquasure USA
Videos for this product
4:32
Click to play video
Aquasure Harmony Series - Programming the Control Head
Aquasure USA
Reviews with images
Drinking straight from the faucet!!
I have well water (Florida stinky kind) which always deposited soot in my faucet aerators, not to mention the hardness and foul sulfur odor (even with the so called reverse osmosis retaining tank that my pump pulled from) and a sediment filter. These puppies took care of that. Set up with a bypass for easy maintenance (manual will show you how) and installed the pre-filter, charcoal filter, softener. And baby my water tastes amazing! Was buying cases and cases of water so we can drink. Not anymore. I’m happy with my investment. They were easy to install. (Use flexible 1” metal hoses instead of pvc to allow for better placement of filters. Shipment came in 5 boxes. Did not even use the reverse osmosis system they sent. No need, water tastes amazing. All in all I’m very satisfied with this purchase! (No leaks either)
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on March 27, 2022
Size: 64,000 GrainsVerified Purchase
This package is great. I was just going to get the softener until big package went on sale. I save money by buying to complete setup at once. Buying it this way is like getting the undercabinet reverse osmosis with tank and faucet for free for additional savings. 1st thing to note is that your filters will arrive in several shipments. Mine arrived in 5 separate shipments. I only received 1 tracking number. So when I tracked my order, it said it would arrive March 21. To my surprise, I got a partial shipment following the day I ordered it. Marked on the packages is a red label explaining that there will be other deliveries and just 1 tracking number. The last package arrived March 20..yes on a Sunday. All packages arrived in good condition and earlier than quoted.
As for the install, it was also easy and straight forward. My house was ready for a water softener install along with a drain. Plumbing took about 2.5 hours total. Since the water softener unit I purchased is made with 1" lines, I used 1" pex and sharkbite push connectors to plumb it all together. I used 2 adapters to connect it to my home copper lines that are 3/4" lines. Plumbing parts cost me $468 tax included. Yes, 1" sharkbite connectors are expensive but easy to work with. Cheaper Plumbing can be had by either using Pex clamps or a 3/4" lines and reducing the Plumbing at each filter inlet and outlet. I choose to keep ot all uniformed. I saved a little money by turning the water softening unit "sideways". It eliminated 2 90 degree elbows which was about $40 in savings. I used about 15 feet of 1" PEX line. (About $15 worth). The cost is all in the connectors. Again, you can plumb it cheaper, but I wanted the ease of it. No leaks, all fittings installed great. I used Teflon tape and a very small dab of silicone for the threads. I used aquarium safe silicone. A small dab is about half a pea size. I wrapped the connectors with Teflon tape and evenly spread the silicone over the tape. This causes a small bead of silicone when the connectors are screwed in all the way, thus sealing it. No leaks. I let it dry overnight. In the morning, I completed the Plumbing to the house and followed the instructions in the manual. It took about 10 minutes for the water to run clear when flushing the carbon out of the lines. If you have a 2 story home, make sure you bleed out the air in all faucets, showers and toilets...especially on the second floor. If you don't, you can lose water pressure due to the trapped air. It happened to me. I simply opened up all faucets upstairs and opened the bypass for the water softener to get water flowing again. After all air was released from the lines, the unit had been working perfectly. We noticed the difference right away after initial setup of the water softener. It takes about an hour for this. You will notice it right away on the cold water side. To notice the hot water difference, it took us a day because of the old water inside of the water heater. We needed to use that water 1st before the softened water came through. I finished install on March 22 and we have been enjoying our system. Water feels and tastes great. No problems so far. Make sure you use the online calculator to program your unit. Ours will regenerate every 3600 gallons at 2am. Our hardness is at 267 in Las Vegas. Make sure that is programmed correctly. You don't want to waste water by regenerating unnecessarily. You will just waste water and salt. If any updates are needed, I will post it.
As for the install, it was also easy and straight forward. My house was ready for a water softener install along with a drain. Plumbing took about 2.5 hours total. Since the water softener unit I purchased is made with 1" lines, I used 1" pex and sharkbite push connectors to plumb it all together. I used 2 adapters to connect it to my home copper lines that are 3/4" lines. Plumbing parts cost me $468 tax included. Yes, 1" sharkbite connectors are expensive but easy to work with. Cheaper Plumbing can be had by either using Pex clamps or a 3/4" lines and reducing the Plumbing at each filter inlet and outlet. I choose to keep ot all uniformed. I saved a little money by turning the water softening unit "sideways". It eliminated 2 90 degree elbows which was about $40 in savings. I used about 15 feet of 1" PEX line. (About $15 worth). The cost is all in the connectors. Again, you can plumb it cheaper, but I wanted the ease of it. No leaks, all fittings installed great. I used Teflon tape and a very small dab of silicone for the threads. I used aquarium safe silicone. A small dab is about half a pea size. I wrapped the connectors with Teflon tape and evenly spread the silicone over the tape. This causes a small bead of silicone when the connectors are screwed in all the way, thus sealing it. No leaks. I let it dry overnight. In the morning, I completed the Plumbing to the house and followed the instructions in the manual. It took about 10 minutes for the water to run clear when flushing the carbon out of the lines. If you have a 2 story home, make sure you bleed out the air in all faucets, showers and toilets...especially on the second floor. If you don't, you can lose water pressure due to the trapped air. It happened to me. I simply opened up all faucets upstairs and opened the bypass for the water softener to get water flowing again. After all air was released from the lines, the unit had been working perfectly. We noticed the difference right away after initial setup of the water softener. It takes about an hour for this. You will notice it right away on the cold water side. To notice the hot water difference, it took us a day because of the old water inside of the water heater. We needed to use that water 1st before the softened water came through. I finished install on March 22 and we have been enjoying our system. Water feels and tastes great. No problems so far. Make sure you use the online calculator to program your unit. Ours will regenerate every 3600 gallons at 2am. Our hardness is at 267 in Las Vegas. Make sure that is programmed correctly. You don't want to waste water by regenerating unnecessarily. You will just waste water and salt. If any updates are needed, I will post it.
Images in this review
Reviewed in the United States on March 3, 2024
Size: 48,000 GrainsVerified Purchase
I have well water (Florida stinky kind) which always deposited soot in my faucet aerators, not to mention the hardness and foul sulfur odor (even with the so called reverse osmosis retaining tank that my pump pulled from) and a sediment filter. These puppies took care of that. Set up with a bypass for easy maintenance (manual will show you how) and installed the pre-filter, charcoal filter, softener. And baby my water tastes amazing! Was buying cases and cases of water so we can drink. Not anymore. I’m happy with my investment. They were easy to install. (Use flexible 1” metal hoses instead of pvc to allow for better placement of filters. Shipment came in 5 boxes. Did not even use the reverse osmosis system they sent. No need, water tastes amazing. All in all I’m very satisfied with this purchase! (No leaks either)
Images in this review
